Dielectric Response Analysis of Polyvinylidene Flouride Doped With Alumina, Titanium Oxides, and Calcium Carbonate Nanoparticles

Authors

  • Abdulraheem Aliyu Department of Physics, Ahmadu Bello University, Zaria, Kaduna, Nigeria Author
  • Sadiq Umar Department of Physics, Ibrahim Badamasi Babangida University, Lapai, Niger State, Nigeria Author
  • Amoka Abdelghaffar Abdelmalik Department of Physics, Ahmadu Bello University, Zaria, Kaduna, Nigeria Author
  • Abdulsalam Ismaila Galadima Department of Physics, Ahmadu Bello University, Zaria, Kaduna, Nigeria Author
  • Shuiabu Saidu Maidawa Department of Physics, Ibrahim Badamasi Babangida University, Lapai, Niger State, Nigeria Author

DOI:

https://doi.org/10.56919/usci.2542.049

Keywords:

Polymer nanocomposite, high-voltage insulation, dielectric response, Permittivity, dissipation factor

Abstract

Nanoparticle incorporation in polymeric materials alters their inherent properties, such as dielectric constant and loss, hence affecting their application as dielectric materials. In the current study, three different oxide-based nanoparticles (Calcium carbonate, Aluminium and Titanium oxides) were added to polyvinylidene Flouride (PVDF) in the concentration of 0.5, 1.0, and 1.5%w/w for each nanoparticles to develop polymer nanocomposites in order to study the effect of such addition on the dielectric responses of PVDF over wide frequency range (20 Hz-2 MHz) using LCR digital frequency meter. The polymer nanocomposite samples were developed using a rapid roll-mix-milling and compression technique at 50°C. The addition of varying nanoparticles to the polymer matrix seems to have the same effects at rising Frequency on the relative permittivity, dielectric loss and conductivity. This suggests that it may be an interesting material for use in high-energy storage devices. A study of the structure and mechanical properties of the developed material is recommended for other potential application areas.

References

Dyre, J. C. (1988). The random free energy barrier model for AC conduction in disordered solids. Journal of Applied Physics, 64(5), 2456–2468. https://doi.org/10.1063/1.341370 DOI: https://doi.org/10.1063/1.341681

Kumar, A., Kumar, H., & Singh, S. (2021). Effect of fillers on the dielectric properties of polymer composites: A review. Journal of Materials Science, 56(17), 10727–10756. https://doi.org/10.1007/s10853-021-05877-1

Kremer, F., & Schönhals, A. (Eds.). (2003). Broadband dielectric spectroscopy. Springer. https://doi.org/10.1007/978-3-642-56120-7 DOI: https://doi.org/10.1007/978-3-642-56120-7

Moussa, H. M., Hassanein, A. M., & Abd El-Hady, N. M. (2021). LCR measurements of dielectric materials: Techniques and applications. Journal of Applied Physics, 129(3), 035103. https://doi.org/10.1063/5.0033800

Niu, S., Zhang, X., & Wu, X. (2017). Dielectric materials: Fundamentals and applications. Progress in Materials Science, 87, 1–39. https://doi.org/10.1016/j.pmatsci.2017.03.001 DOI: https://doi.org/10.1016/j.pmatsci.2017.03.001

Pinto, M., & Martins, J. (2020). Dielectric materials for energy storage: Recent advances and future perspectives. Advanced Materials Interfaces, 7(2), 1901228. https://doi.org/10.1002/admi.201901228

Saleh, T. A., Shetti, N. P., Shanbhag, M. M., Reddy, K. R., & Aminabhavi, T. M. (2020). Recent trends in functionalized nanoparticles loaded polymeric composites: An energy application. Materials Science for Energy Technologies, 3, 515–525. https://doi.org/10.1016/j.mset.2020.07.006 DOI: https://doi.org/10.1016/j.mset.2020.05.005

Wang, Z., Wang, P., & Zhang, Y. (2019). Polyvinylidene fluoride (PVDF) based composites: A review on processing and properties. Composites Science and Technology, 189, 108–121. https://doi.org/10.1016/j.compscitech.2019.03.020 DOI: https://doi.org/10.1016/j.compscitech.2019.03.020

Xu, T., Liu, C., & Chen, Y. (2022). Dielectric properties of PVDF nanocomposites: The influence of nanofillers and polymer matrix interactions. European Polymer Journal, 162, 110822. https://doi.org/10.1016/j.eurpolymj.2021.110822 DOI: https://doi.org/10.1016/j.eurpolymj.2021.110822

Zhang, Q., Li, H., & Zhou, J. (2020). Piezoelectric polymers: Advances and opportunities. Advanced Functional Materials, 30(49), 2004874. https://doi.org/10.1002/adfm.202005223 DOI: https://doi.org/10.1002/adfm.202005223

Downloads

Published

2025-06-30

Issue

Vol. 4 No. 2 (2025)

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

UMYU Scientifica recognizes the importance of protecting authors’ intellectual property while promoting the free exchange of scientific knowledge. The journal adopts a copyright-retention model that empowers authors to maintain ownership of their work while granting the journal rights necessary for publication and dissemination.

1. Copyright Ownership

Authors publishing with UMYU Scientifica retain full copyright and publishing rights to their work. By submitting a manuscript, authors agree to grant the journal a non-exclusive license to publish, reproduce, distribute, and archive the article in all forms and media for the purpose of scholarly communication.

2. Licensing Terms

All articles are published under the Creative Commons Attribution–NonCommercial (CC BY-NC) license.
This license permits others to:

  • Share - copy and redistribute the material in any medium or format.
  • Adapt - remix, transform, and build upon the material.
  • For non-commercial purposes only, provided that proper credit is given to the original author(s) and UMYU Scientifica as the source, a link to the license is provided, and any modifications are clearly indicated.

Commercial reuse or distribution of the content requires written permission from both the author and the editorial office.

3. Author Rights

Authors are free to:

  • Deposit all versions of their manuscript (preprint, accepted version, and published version) in institutional, disciplinary, or public repositories without embargo.
  • Use and distribute their published article for non-commercial scholarly purposes, including teaching, conference presentations, and research sharing.
  • Include their work in future books, theses, or compilations, provided proper citation to the journal is made.

4. Publisher’s Rights

Upon publication, UMYU Scientifica retains the right to:

  • Host, index, and disseminate the article through the journal’s website and partner databases.
  • Archive the content in long-term preservation systems such as the PKP Preservation Network (PKP-PN) and the Umaru Musa Yar’adua University Institutional Repository.

5. Attribution and Citation

Users must give appropriate credit to the author(s), include a link to the article’s DOI or the journal webpage, and indicate if changes were made. Proper citation is required whenever the work is reused or referenced.

6. License Reference

For detailed terms of use, please refer to the Creative Commons Attribution–NonCommercial 4.0 International License (CC BY-NC 4.0):
https://creativecommons.org/licenses/by-nc/4.0/

How to Cite

Aliyu, A., Umar, S., Abdelmalik, A. A., Galadima, A. I., & Maidawa, S. S. (2025). Dielectric Response Analysis of Polyvinylidene Flouride Doped With Alumina, Titanium Oxides, and Calcium Carbonate Nanoparticles. UMYU Scientifica, 4(2), 475-479. https://doi.org/10.56919/usci.2542.049

Most read articles by the same author(s)

Similar Articles

11-20 of 211

You may also start an advanced similarity search for this article.